(Opening sizes: 5/64″ – 7/8″)
This particular non-blinding screening surface was the original Hoyt non-blinding screen. The Veno™ Screen was initially designed in Dusseldorf, Germany, over 75 years ago. Lumsden Corporation/Hoyt Wire Cloth, through the vision of founder Alexander D. Lumsden, was the first American company to introduce non-blinding woven wire screens into the United States.
The Veno™ Screen is specifically engineered and designed to alleviate blinding and plugging conditions when the use of conventional square opening wire cloth is not acceptable. The Veno™ Screen accurately controls material sizing, both through and over its screening surface, while staying clean and remaining efficient.
Veno™ works on the principle of wire movement. It is designed with alternating pre-straightened “straight wires” and alternately crimped “sizing control” wires. Both straight and crimped wires are alternately woven together with “binding wires”, which are placed directly over the longitudinal support bars (bucker-up bars) on the vibrating screen. For additional wear-life, the binding wires can be covered with abrasion-resistant polyurethane for superior wear-life. Veno™ should be considered in applications where accurately sized material is required and blinding conditions are moderate. The Veno™ Screen is ideally suited for use in Hot Mix Batch Asphalt Plants to alleviate plugging conditions. In this case, polyurethane will not be applied to the bindings.